Low Power consumption for long battery life.

• Idle current draw:  70µA typical

• Configurable refresh interval from once per 10 seconds to once per 7.5 days.
• Configurable shutter and focus hold in times from 1 millisecond to 65 seconds.
• Configurable time delay options from 10 seconds to 7.5 days.
• Configurable photo cell adjustments to fine tune day and night settings.
• Configurable auto camera arming / auto walk test LED disable time.
• Ability to custom configure how the outputs are controlled.

• 10s, 30s, 1m, 3m, 5m, 10m, 20m, and 30m.
• Custom user programmable delay times available by using the serial interface.

• Option 1 - sensors mounted on the circuit board trace side.
• Option 2 - sensors mounted on the same side as the components.
• What's the difference between Option 1 and Option 2?

• Daylight Only, Night Only, 24 hour mode.
• Photocell parameters are configurable via the serial interface to allow users to fine tune when it's light or dark

• Allows easy setup, no switches to accidentally forget about!
• Automatically arms camera outputs after NOT sensing motion for 5 continuous minutes
• Arming time is configurable via the serial interface.

• Automatically turns off the LED after NOT sensing motion for 5 continuous minutes
• Disable time is configurable via the serial interface (this time is the same as the Arming time).

• Static mode
  • For basic cameras that don't fall asleep, such as the Canon Owl PF.
  • Focus/Shutter hold time configurable through the serial interface
• Refresh mode
  • For cameras that need to stay on all of the time, such as the Fuji AF60 or Olympus D370/D380.
  • Focus/Shutter hold time configurable through the serial interface
  • Refresh interval configurable through the serial interface
• ON-OFF mode
  • For cameras that need to be powered on through a slide switch, such as the Olympus D370/D380/D390.
  • Focus/Shutter hold time configurable through the serial interface
  • On/Off output time configurable through the serial interface
• ON-OFF-ON mode
  • For cameras that need to be powered on through push button type power switch such as the Sony P-32.
  • Focus/Shutter hold time configurable through the serial interface
  • On/Off pulse time configurable through the serial interface.

• Focus, Shutter, Refresh/On-Off, and Spare (counter) output.
• These outputs are separately controllable via the serial interface to allow thousands of possible output configurations.
• 150 mA absolute maximum output on each output.  (subject to change, verify with manufactures data sheet)