|
| |
CB3-K Circuit Board Kit - With refresh pulse and
Day/Night/24 Hour selection
- Low Power consumption for long battery life.
- Idle current draw: 200µA typical
- Timing Cycle current draw: 450µA typical
- LED current draw: 6mA typical
- Two different sensor mounting options.
- Adjustable camera refresh pulse (6 to 9 minute configurable interval)
- Custom refresh pulse intervals available (recommended for Olympus
Digital camera)::
- 30 minute, 45 minute, 60 minute
- 1 Second pulse duration.
- Adjustable camera shutter output (2 to 13 Seconds).
- Adjustable motion sensor sensitivity with a range of 60+ feet.
- Counter output for the optional event
counter.
- Bright LED walk test light.
- 4 time delay Options before next picture is allowed to be taken.
- 30 seconds, 1 Minute, 3 Minutes, 5 Minutes
- Custom delay times available, contact us
- 6 to 10 VDC battery operation (4-C cell batteries Recommended, they should last all season long!)
- 3 different mode settings to take pictures when you want to!
- Daylight Only mode
- Night Only mode
- 24 hour mode
|
| |
|